Catchpit Chamber - 600mm Diameter & 1.5 Metre Deep for 160mm Pipes
|Material||Polyethylene moulded base section with PVC Risers|
|Dimension||300mm Diameter x 1500mm Deep|
|Specification||BS EN 13598-2 (2009)|
600mm diameter x 1500mm deep catchpit chamber with 160mm drainage pipe inlet and outlet.
Our Catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.
Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install and there is no need for machinery or heavy lifting equipment.
Our Catchpit Chambers are factory assembled and come in one piece.
Catchpit Chambers Features & Benefits
- 300mm deep sump
- Standard Restriction Cap supplied with 1500mm & 2000mm deep chambers to comply with SfA7
- 160mm drainage pipe options to fit underground drainage systems
- Optional inlets available to suit site requirements
These catchpit chambers are manufactured in the UK to BS EN 13598-2 (2009).
To find out how to install your catchpit chamber view our general installation guide.
Inlets & Outlet
Further inlets can be accommodated dependant on the diameter and position required. The diagram shows the preferred options if multiple inlets are required.
We will advise on the suitability once we have the details of your requirement.
Delivery of Catchpit Chamber
PLEASE NOTE - All catchpit chambers come on a 3-5 day delivery timescale. Customised products will likely take a little longer.