Catchpit Chamber - 600mm Diameter & 1 Metre Deep for 225mm Twinwall
|Material||Polyethylene moulded base section with PVC Risers|
|Dimension||600mm Diameter x 1000mm Deep|
|Specification||BS EN 13598-2 (2009)|
600mm diameter x 1000mm deep twinwall catchpit chamber with 225mm twinwall inlet and outlet.
Our Catchpit chambers are to be used for catchment of silt and solids in surface water drainage systems. This pit will give above ground access for inspection and maintenance of systems.
Part of the Accesso Blue range and manufactured by Turtle Enviro, catchpit chambers are lightweight and quick and simple to install – there is no need for machinery or heavy lifting equipment.
Our Catchpit Chambers are factory assembled and come in one piece.
Catchpit Chambers Features & Benefits
- 300mm deep sump
- Standard Restriction Cap supplied with 1500mm & 2000mm deep chambers to comply with SfA7
- 225mm twinwall pipe options to fit twinwall pipework systems
- Optional inlets available to suit site requirements
These catchpit chambers are manufactured in the UK to BS EN 13598-2 (2009).
To find out how to install your catchpit chamber view our general installation guide.
Inlets & Outlet
Standard outlet will always be at 0 degrees and the standard inlet will be at 180 degrees.
Changes to this and further inlets can be accommodated dependant on the diameter and position required.
The diagram shows the preferred options if multiple inlets are required.
Please contact us with any amends you would like before ordering. We will advise on the suitability once we have the details of your requirement.
Delivery of Catchpit Chamber
PLEASE NOTE - All catchpit chambers come on a 3-5 day delivery timescale. Customised products will likely take a little longer.