Drainage Coupling Double Socket - 160mm

In stock
Code
6D105
More Information
Code 6D105
EAN Code 5055149943423
Brand PBSL Group
Colour Terracotta
Length Overall Length 135mm
Material PVC-u
Style Double Socket
Size 160mm
£7.27 £6.06
You need to spend another £250.00 to qualify for 2.5% discount.

This coupling is used to join two plain ended 160mm pipes together.

It can also be used to connect a plain ended pipe to the plain end of another fitting. 

Whenever any connection is made to a fitting which incorporates a ring seal (push fit) connection, the pipe should always be chamfered and the seal lubricated with silicon lubricant prior to insertion into the fitting.

160mm Underground Drainage

160mm underground drainage is most commonly used for a collection of flows from the 110mm pipes that flow into it. The range of fittings available in 160mm is generally smaller than the 110mm range, as a run of 160mm drainage is usually more direct and with fewer connections than 110mm pipe.

The fall required in a 160mm pipe depends on the peak flow in litres per second (as with 110mm pipes), but as a rule of thumb the fall it is shallower than that required for a 110mm pipe. The composition of backfill used can also be different, with slightly larger aggregate fill (pea shingle) being allowable for a 160mm pipe installation. Both of these criteria should be checked with local building control prior to installation.

In terms of installation and connecting pipes to fittings, the process is the same as with 110mm pipes. Cut pipes should always be chamfered prior to insertion into a fitting, and seals should be lubricated with silicon spray or grease.

160mm drainage is often still referred to as 6”, reflecting the old comparative imperial size that was used. As this old pipe was commonly made from clay or salt glaze, flexible rubber adaptors are now available to make a straightforward connection from this old material to PVC.