Drainage Bend Double Socket - 87.5 Degree x 110mm - Pack of 16

This pack of 16 double socket 87.5 degree bends is an economical bulk buy for 110mm underground drainage installations. These bends are most commonly used vertically at the foot of a soil pipe or a rainwater pipe. Most people refer to them as 90 degree bends, but they are manufactured at 87.5 degrees to create a natural fall that keeps material flowing through the fitting.

Both ends of the bend are socketed to accept a length of 110mm drainage pipe. If the pipe has been cut to length it should be chamfered and lubricated with our SG100 lubricant before insertion into the socket to ensure the best possible seal. The sockets can also receive other fittings with a pre-chamfered spigot end, such as single socket bends or gullies.

Buying 110mm drainage bends by the pack lowers the cost per fitting and means you always have spares available on site.

Please watch our overview video below